Blog
Practical CAD engineering guides: CNC corner radii, clearance holes, 3D printing rules, parametric modeling and agent workflows with kernelCAD.
Build from a model in code-first CAD, or connect an agent through the KernelCAD MCP tools.
-
Report a Studio problem
· Andrii Shylenko
Send the current evaluate or export failure, a model-viewport screenshot, and an optional design.
-
AI CAD for coding agents: from a prompt to checked STEP and STL
· Andrii Shylenko
Connect kernelCAD to ChatGPT, Claude or your coding agent, inspect editable CAD, check what matters, then export manufacturing files.
-
Paid CAD automation pilot for engineering teams
· Andrii Shylenko
Put one real part or assembly workflow through kernelCAD, from requirements to editable source, checks and STEP/STL output.
-
CNC internal corner radius design rules, and how to check them
· Andrii Shylenko
Why end mills leave a radius in every inside corner, how big to make it, how deep a pocket can go, when to use dogbone reliefs, and how to catch tight corners and undercuts before you ask for a quote.
-
The 10 biggest challenges design engineers face, and how to overcome them
· Andrii Shylenko
Late manufacturing feedback, lost design intent, revision chaos, fastener mistakes, drawings out of sync and more. Why each one costs you time and money, and how kernelCAD removes it from your week.
-
FDM 3D printing design rules for overhangs, bridges, walls and holes
· Andrii Shylenko
The numbers that decide whether an FDM part prints cleanly (45° overhangs, short bridges, walls in nozzle multiples, holes of 2 mm and up) and how to check a model against them before you slice.
-
Metric clearance hole sizes (ISO 273): chart and how to choose close, normal or loose fit
· Andrii Shylenko
The ISO 273 clearance hole chart for M2 to M20 in close, normal and loose fit, with tap drills, how to pick a fit class, and how kernelCAD reads the fit back from your holes.
-
From a Claude concept to a four-axis drawing robot
· Andrii Shylenko
A small four-axis desktop robot that draws with a pencil, designed in KernelCAD.
-
A hand in motion
· Andrii Shylenko
Watch it curl and open in Studio.
-
Mark up a model and send it with your prompt
· Andrii Shylenko
Pin a note and a measurement to the model, then send the camera and markup with your prompt. Save the snapshot and load it back later.
-
Bolted joints from one fastener table
· Andrii Shylenko
Pick a screw and a grip. kernelCAD chooses the length, adds the washers and nut, and cuts the countersink a flat head needs.
-
Routing 23 lines on a rocket-engine example
· Andrii Shylenko
Follow named ports, authored bends and service clearances through a full assembly, then reproduce an igniter-line collision and repair it.
-
Routing bent tubes between ports
· Andrii Shylenko
How to route rigid lines between ports with tube() and tubeSpec(), and read the bend table and clearances the kernel reports.
-
Download a drawing in one click
· Andrii Shylenko
Download a dimensioned PDF, or adjust its style and callouts in Studio.
-
kernelCAD now shows the sizes on your model
· Andrii Shylenko
Read part sizes straight off the 3D view, measure anything you click, and download a dimensioned drawing as a PDF.