Standard parts · Standard servo
MG995 / MG996R standard servo (datasheet envelope)
Catalog part ID: mg995-servo. Dimensions below are from the published catalog index.
Dimensions
- Provenance
- modelled from datasheet drawing, not a manufacturer model
- Dimension source
- https://towerpro.com.tw/product/mg996r/
- Dimension drawing
- http://torqpro.com/wp-content/uploads/2014/07/小馬達尺寸標示圖B.jpg
- Drawing height to shaft tip mm_a
- 42.7
- Drawing body length mm_b
- 40.9
- Drawing height to cover top mm_c
- 37
- Drawing width mm_d
- 20
- Drawing length over ears mm_e
- 54
- Drawing ear underside height mm_f
- 26.8
- Shaft to case end (mm)
- 10
- Shaft offset basis
- scaled from drawing (Tower Pro size drawing, 10.1-10.2 mm from case end, +-0.5 mm); not dimensioned in the table
- Geometry
- envelope: case box B x D x C; output axis and ear-face planes are connectors only
- Not modelled
- ear thickness, ear holes (centres, diameters, slots), output boss and spline (diameter, tooth count), horns (all variants), horn and shaft screws, wire exit, stepped gear-cover shape
- Shared case
- MG995 and MG996R: identical Tower Pro table (A-F), one record
- Dimension cross check
- Handson MG996R drawing shows 40.3 case, 53.6 over ears, 20 wide, 26.6 ear underside; differs by <=0.6 mm, Tower Pro table used
Standard: Not specified · Licence: MIT
Use this exact size
Use this part ID in code-CAD or the MCP catalog tools:
const part = await lib.fetchPart('mg995-servo');
The STEP file contains the catalog solid. Inspect it before manufacturing; geometric details may be simplified.
← All standard servo