Standard parts · motor
Standard servo
Standard servo: 1 size. Dimensions: shaft to case end. Use parts in kernelCAD Studio or MCP.
Select a size
Tap a size to see exact dimensions and a STEP download where available. Swipe horizontally to see all columns.
| Part | Provenance | Dimension source | Dimension drawing | Drawing height to shaft tip mm_a | Drawing body length mm_b | Drawing height to cover top mm_c | Drawing width mm_d | Drawing length over ears mm_e | Drawing ear underside height mm_f | Shaft to case end (mm) | Shaft offset basis | Geometry | Not modelled | Shared case | Dimension cross check |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MG995 / MG996R standard servo (datasheet envelope) | modelled from datasheet drawing, not a manufacturer model | https://towerpro.com.tw/product/mg996r/ | http://torqpro.com/wp-content/uploads/2014/07/小馬達尺寸標示圖B.jpg | 42.7 | 40.9 | 37 | 20 | 54 | 26.8 | 10 | scaled from drawing (Tower Pro size drawing, 10.1-10.2 mm from case end, +-0.5 mm); not dimensioned in the table | envelope: case box B x D x C; output axis and ear-face planes are connectors only | ear thickness, ear holes (centres, diameters, slots), output boss and spline (diameter, tooth count), horns (all variants), horn and shaft screws, wire exit, stepped gear-cover shape | MG995 and MG996R: identical Tower Pro table (A-F), one record | Handson MG996R drawing shows 40.3 case, 53.6 over ears, 20 wide, 26.6 ear underside; differs by <=0.6 mm, Tower Pro table used |
Use a size in a model
Every size is a catalog part with a STEP solid and mate connectors. Use a code-CAD script, or ask an agent through the MCP fetch_part tool, by its part ID:
const part = await lib.fetchPart('mg995-servo');