Standard parts · motor

Mini servo

Mini servo: 1 size. Dimensions: shaft to case end. Use parts in kernelCAD Studio or MCP.

Front and top view of MG90S mini servo (datasheet envelope)
Front and top view of MG90S mini servo (datasheet envelope), projected from the catalog STEP file. This is an example outline for this family, not a detailed fastener drawing. Select a size below for dimensions and downloadable geometry.

Select a size

Tap a size to see exact dimensions and a STEP download where available. Swipe horizontally to see all columns.

PartProvenanceDimension sourceDimension drawingDrawing height to shaft tip mm_aDrawing body length mm_bDrawing height to cover top mm_cDrawing width mm_dDrawing length over ears mm_eDrawing ear underside height mm_fShaft to case end (mm)Shaft offset basisGeometryNot modelledDimension cross check
MG90S mini servo (datasheet envelope)modelled from datasheet drawing, not a manufacturer modelhttps://towerpro.com.tw/product/mg90s/http://torqpro.com/wp-content/uploads/2014/07/小馬達尺寸標示圖B.jpg32.522.828.412.432.118.55.8scaled from drawing (drawing in the MG90S datasheet, components101.com, 5.8 mm from case end, +-0.5 mm); not dimensioned in the Tower Pro tableenvelope: case box B x D x C; output axis and ear-face planes are connectors onlyear thickness, ear holes (centres, diameters, slots), output boss and spline (diameter, tooth count), horns (all variants), horn and shaft screws, wire exit, stepped gear-cover shapeMG90S datasheet drawing shows 22.5 case, 32.5 over ears, 12 wide; differs by <=0.4 mm, Tower Pro table used
Standard
none: catalog family without a published standard
Category
motor
Licence
MIT
Attribution
Dimensions from the Tower Pro published product table and size drawing (towerpro.com.tw); geometry authored by kernelCAD contributors. Not a manufacturer model.

Use a size in a model

Every size is a catalog part with a STEP solid and mate connectors. Use a code-CAD script, or ask an agent through the MCP fetch_part tool, by its part ID:

const part = await lib.fetchPart('mg90s-servo');

Open kernelCAD Studio ↗