Catalog / Telecom infrastructure / Dual sector panel array
Dual sector panel array
Two cellular sector panel antennas on a T-frame head: centre pole on a gusseted base plate, twin crossbars clamped with U-bolts, a mounting pipe at each end carrying a 1.4 m D-section radome with end caps, tilt brackets, bottom connectors and jumper cables back down the pole; panels splayed 30 degrees or side by side. Material controls: radomes, end caps and brackets, galvanized frame, stainless clamps, connectors and jumpers. Field-site and high-visibility presets.
Open in Studio- Kit
- Telecom infrastructure
- Category
- prop
- Triangles
- 2,036 (budget 2,600)
- Licence
- CC0 1.0
- Price
- Free
- Size
- 1.363468 × 2.624 × 0.657997 m
- Fits
- telecom, network, infrastructure, industrial
- Tags
- sector antenna, panel antenna, antenna array, cellular, 4G, 5G, base station, rooftop, telecom, network, communications, infrastructure, low poly, scene prop, CC0
Knobs
7 parameters you can change in Studio before export.
| Knob | Label | Type | Default | Choices |
|---|---|---|---|---|
scale | Overall scale | number | 1 | — |
azimuth | Panel azimuth | choice | splayed | splayed, parallel |
radome | Radomes (UV-stable polymer) | color | #d6dadb | — |
powderCoat | End caps and tilt brackets (powder-coated) | color | #318b96 | — |
galvanizedSteel | Pole, crossbars and pipes (galvanized steel) | color | #77868d | — |
stainlessSteel | Clamp collars and U-bolts (stainless steel) | color | #d2dbdc | — |
polymer | Connectors and jumper cables (black polymer) | color | #22292d | — |
Presets
- fieldSite: Radomes (UV-stable polymer)
#c4c9c3; End caps and tilt brackets (powder-coated)#52756b; Pole, crossbars and pipes (galvanized steel)#8f9b9b; Clamp collars and U-bolts (stainless steel)#d0d9d6; Connectors and jumper cables (black polymer)#263a37 - highVisibility: Radomes (UV-stable polymer)
#eef0ee; End caps and tilt brackets (powder-coated)#e0aa18; Pole, crossbars and pipes (galvanized steel)#3a4b51; Clamp collars and U-bolts (stainless steel)#e4e9e6; Connectors and jumper cables (black polymer)#27363c
More in this kit
- Sector antenna frame
- Battery backup cabinet
- Cable entry gland plate
- Cable ladder section
- Cable splice pit frame
- Cable support hanger
- Cable tray elbow
- Cell site cabinet
- Conduit riser frame
- Equipment fan panel
- Fiber slack storage reel
- Fiber distribution cabinet
- Fiber dome closure
- Fiber drop terminal
- Fiber handhole cover
- Fiber route marker
- Fiber service loop rack
- Fiber splice closure
- Fiber terminal box
- GNSS timing antenna
- Grounding busbar
- Grounding rod set
- Guyed mast anchor set
- Lattice mast section
- Lightning protection air terminal
- Mast extension section
- Mast outrigger frame
- Microwave backhaul shelter
- Microwave dish antenna
- Monopole antenna mast
- Omnidirectional whip antenna
- Optical patch panel
- Outdoor network cabinet
- Parapet mast clamp
- Pedestal fiber terminal
- Pole mount radio cabinet
- Cylindrical antenna radome
- Remote power shelf
- Remote radio unit
- RF hazard marker
- Roof cable penetration seal
- Rooftop microwave dish
- Rooftop network cabinet
- Rooftop tripod mast
- Sector panel antenna
- Site identification placard
- Split cable duct
- Surge protection enclosure
- Telecom cable marker post
- Telecom equipment shelter
- Telecom warning sign
- Wall mast stand-off bracket
- Waveguide bridge tray
- Weatherproof junction box
- Yagi radio antenna